Yaesu FT-65 User Manual page 7

MARS CAP modification to unlock, open TX
This is a software reset on the radio. It does not delete the memories or settings.
With the radio Off. Press and hold the PTT and MONI key (middle key with 1 lines)
Turn on the radio and release the keys
Type 62406665
The radio will restart with extended transmit enabled
Repeat the process to disable extended transmit
Extras
This is a "user" radio that is specialized for Amateur radio operators of all skill levels.
By "user" radio, I mean that its type of operation can be limited so you can put the
radio in anyone's hands and they can't mess anything up.
RESET / USER LIMITS / CLONING
With the radio Off. Press and hold the PTT and MONI key (middle key with 1 lines)
Turn on the radio and release the keys
Purpose Display
Reset F1: SET RESET
Reset F2: MEM RESET
Reset F3: BANK RESET
Reset F4: ALL RESET
User F5: MEM-ONLY
User F6: VHF-ONLY
User F7: UHF-ONLY
User F8: DUAL DISP
See Dual Display
on next page
Cloning F9: CLONE
For User settings, do the process again to turn it off.
Cons
Has a non-standard speaker/microphone jack. The Yaesu part numbers that work are:
Speaker/Mic SSM-17B and Earpiece/Mic SSM-512B
Yaesu FT-65 User Manual
Reset the set (menu) settings to factory defaults.
Clear the memory settings to factory default.
Clear the memory bank assignments.
Clear all memory and other settings to factory default.
Operation on Memory mode only.
Operation on the VHF band only.
Operation on the UHF band only.
Display both VFO-A and VFO-B
Two-line display in Memory mode.
Or Split band VFO use. RX on one band and TX on another
Enters clone mode.
Description
Using at an event?
Antenna restrictions?
Antenna restrictions?
on the same screen.
7