Graco TURN2ME Instruction Manual page 42

3-A Rear-Facing Use
Lower Anchor Attachment
Do not install by this method
for a child weighing more than
35 lb (16 kg)
Visit www.gracobaby.com
and the Graco Turn2Me
®
3-in-1 Car Seat product
page to view installation
videos.
Rear-Facing:
4-40 lb (1.8-18.1 kg) and
whose top of head is at
least 1" (2.5 cm) below the
headrest adjustment handle
• Infants who weigh less than
22 lb (10 kg) MUST be rear-facing.
• Make sure the seat is in rear-facing position by
checking if the Seat Position Indicator on the
side of the seat is pointing to the blue label.
• Make sure the car seat is placed rear-facing in
the vehicle back seat.
• Make sure lower anchor strap or vehicle seat
belt is routed through the blue rear-facing belt
path.
• Ensure the car seat is installed tightly in your
vehicle. Car seat should not move at the rear-
facing belt path more than 1" (2.5 cm) from
TM
side to side, front to back.
• Check recline level making sure the bubble is
within the blue zone. Vehicle MUST be on level
ground.
42