EnGenius EWS357-FIT Quick Start Manual page 9

Option B: On-premises Management with FitController
Step 1: Connecting Ethernet
Connect the Ethernet cable from the EnGenius Fit AP directly to the DHCP-enabled network, which is the same Layer-2
network as FitController.
Internet
Gateway EnGenius Fit
FitController
Access Point
EnGenius Fit PoE Switch
Step 2: Log in to the FitController
Launch your web browser to access the login page of FitController and create an account. Enter the email address and
password that you created and click Sign In.
The FitController default IP address in DHCP client mode will get an IP address (e.g. X.X.X.X:8080) from the DHCP
server. If FitController cannot get an IP address from the DHCP server, the default IP address will be 192.168.1.250:8080.
EWS357-FIT Quick Start Guide