auna Vertico Swing DAB Manual page 32

EN
32
4. Set the alarm time: Press the "Forward" and "Backward" buttons on the
device (or the "Up" and "Down" buttons on the remote control) to select
"hour" and press the "OK" button to confirm. Press the "Forward" and
"Backward" buttons on the device (or the "Up" and "Down" buttons on
the remote control) to select "minutes" and press the "OK" button to
confirm.
5. Select the alarm source: Press the "OK" button and use the "Forward"
and "Backward" buttons on the device (or the "Up" and "Down" buttons
on the remote control) to select the desired setting from: "Buzzer"
(summer) > "Digital Radio" > "FM Radio". Press the "OK" button to
confirm and you will return to the menu.
6. Select the duration of the alarm: Press the "OK" button and use the
"Forward" and "Backward" buttons on the device (or the "Up" and
"Down" buttons on the remote control) to select the desired setting
from: "15" > "30" > "45" > "60" > "90" > "120" minutes. Press the "OK"
button to confirm and you will return to the menu.
7. Select "Volume" and press the "OK" button to adjust the volume of the
alarm.
8. "Alarm 2": To set "Alarm 2", please repeat steps 1-7.
NOTE: The alarm volume will gradually increase until it reaches the alarm
volume you set.
Stop alarm
• When the alarm sounds, you can stop it immediately by pressing the
"ON" button.
• When the alarm sounds, you can press any button (except the "ON"
button) to activate the snooze function. The default time for this
function is 9 minutes.
NOTE: Press the "ON" button to stop the snooze function.
Equaliser
• Under "EQUALISER" you can select a standard sound format or
configure your own. Select one of the following sound formats:
"Normal" > "Classic" > "Jazz" > "Pop" > "Rock" > "Speech" > "My EQ" and
confirm with the "OK" button. The setting takes effect immediately.
• If you have selected a personalised sound format under the following
entry, select "My EQ" to apply the sound format directly. Then go into
the "My EQ" settings to adjust treble and bass.