LG Signature SideKick UWD1CW Owner's Manual page 12

12 INSTALLATION
2
Remove and save the foam block for future
use.
• If the pedestal washer must be moved in
the future, the foam block will help prevent
damage to the pedestal washer during
transportation.
• To prevent damage, do not remove the
foam block until the pedestal washer is at
the final location.
3
Turn the top cover about 180 degrees, cover
the opening in the top with the top cover and
install 4 short sheet metal screws.
4
Attach the two back brackets on the rear top
of the pedestal washer by inserting 4 machine
screws in each bracket.
Attaching Front Brackets on the
Front-Loading Washer
NOTE
• Do not use the front brackets provided with the
pedestal washer if the front-loading washer
already has front brackets installed or has a
stacking feature on the base.
1
Tilt and hold the front-loading washer.
2
Attach the two front brackets to the bottom of
the front-loading washer using 7 machine
screws in each bracket.
Stacking the Front-Loading Washer
on the Pedestal Washer
1
Place the pedestal washer in the final location
and adjust the leveling legs on the pedestal
washer to level it. Fully retract the legs of the
front-loading washer.
2
Place the front-loading washer on top of the
pedestal washer.
• Place the leveling feet of the front-loading
washer inside the bracket openings on the
pedestal washer, and align the bracket
screw holes.
3
Securely attach the two washers at the
corners using screws.
• Insert the screws at the sides of the washers
first, then insert the screws at the front and
back.