Milwaukee MC310 User Manual

Milwaukee MC310 User Manual

Pro digital ec monitors
Hide thumbs Also See for MC310:

Advertisement

SPECIFICATIONS

RANGE
MC310
0.0 to 10.0 mS/cm
MC410
0 to 1990 ppm
RESOLUTION
MC310
0 to 1990 mg/L (ppm) / 1 mg/L
MC410
10 ppm
ACCURACY
±2% Full Scale
(@25°C)
MC310
1.0 to 5.0 mS/cm
MC410
100 to 1900 ppm
active when the measure
is bellow/above than the
ALARM
setpoint, in according with
the BELLOW/ABOVE switch
TEMP.
Automatic, from 0 to 50°C
COMPENSATION
ENVIRONMENT
0 to 50°C, 95% RH max.
PROBE
MA812/2 (included)*
POWER
12 VDC adapter (included)
SUPPLY
DIMENSIONS
148.5 x 82.5 x 32 mm
WEIGHT
180 g (meter only)
(*) To be replace by technical personnel only

CERTIFICATION

Milwaukee Instruments conform to the
CE European Directives.
Disposal of Electrical & Electronic
Equipment. Do not treat this product
as household waste. Hand it over to
the appropriate collection point for the
recycling of electrical and electronic
equipment.
Please note: proper product prevents potential
negative consequences for human health and the
environment. For detailed information, contact your
local household waste disposal service or go to
www.milwaukeeinstruments.com (USA & CAN) or
www.milwaukeeinst.com.

RECOMMENDATION

Before using this product, make sure it is entirely
suitable for your specific application and for the
environment in which it is used. Any modification
introduced by the user to the supplied equipment
may compromise the meter's performance. For your
and the meter's safety do not use or store the meter in
hazardous environment. To avoid damage or burn, do
not perform any measurement in microwave ovens.

WARRANTY

These instruments are warranted against defects in
materials and manufacturing for a period of 2 years
from the date of purchase. Probe is warranted for
6  months. This warranty is limited to repair or free
of charge replacement if the instrument cannot be
repaired. Damage due to accidents, misuse, tampering
or lack of prescribed maintenance is not covered by
warranty. If service is required, contact your local
Milwaukee Instruments Technical Service. If the repair
is not covered by the warranty, you will be notified of
the charges incurred. When shipping any meter, make
sure it is properly packaged for complete protection.
ISTMC310_11_20
USER MANUAL
RoHS
COMPLIANT
MC310 & MC410
PRO Digital EC Monitors
milwaukeeinstruments.com (USA & CAN)
SATISFACTION
GUARANTEED
milwaukeeinst.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MC310 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Milwaukee MC310

  • Page 1 If service is required, contact your local DIMENSIONS 148.5 x 82.5 x 32 mm Milwaukee Instruments Technical Service. If the repair WEIGHT 180 g (meter only) is not covered by the warranty, you will be notified of the charges incurred.
  • Page 2 Turn the meter on by pressing the ON/OFF key. central front knob to the desired value. y Wait until the reading stabilize for temperature y The selectable range for MC310 is from 1.0 to variations, and then adjust the EC/TDS 5.0 mS/cm.

This manual is also suitable for:

Mc4104260587879598

Table of Contents