Quoizel WVR9007A Installation Manual

Please go to www.quoizel.com
Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses,
drill bit, center punch, hammer, drill and wrench.
Light Source: (1) A21 Medium Base Bulb 150W Maximum, Medium Base T9 Vintage Bulb is recommended, bulb not included.
Estimated Assembly Time:
Preparation: Identify and inspect all parts before beginning installation. Check package content list and diagrams below to ensure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact your original place of purchase.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Package Contents
Mounting Screw
A
x 3
Glass Panel
B
x 4
-
STEP 1 Remove the Cage from the Fixture Body
A. Unlock lock balls on the bottom of the Fixture Body (C) to remove
the cage.
C
2018 QuoizelInc.
for product cleaning tips. Go to the
20-30 minutes
Cage
Fixture Body
Figure 1
visit us on-line at www.quoizel.com
Installation Guide #IS-WVR9007A
For Style WVR9007A
Care + Maintenance selection.
-
STEP 2 Install Glass Panel
A. Insert the Glass Panel (B) into the
slot in the top edge of the cage.
Secure the Glass Panel (B) by
pressing the tabs on to the bottom
edge of the cage onto the bottom
edge of the Glass Panel (B).
Fixture
C Body
x 1
-
STEP 3 Install Bulb and Cage
A. Insert the bulb onto the socket and
screw snugly into place.
B. Place the bolts on the bottom edge
of the cage back onto the Fixture
Body (C) and secure with
previously removed lock balls.
Hand tighten until snug.
Figure 3
Lock Ball
1of2
marking pen, 1/16"
Slot
Cage
Tab
Tab
B
Figure 2
T9 Vintage Bulb
(recommended
but not included)
Socket
Lock Ball
ReleasedDate:2018-10-08
Cage
Bolt
Fixture Body