Stainless Steel Kick Plate Installation Instructions - Summit ADFD2D24 Instruction Manual

Stainless Steel Kick Plate Installation Instructions

This model is designed for a 32" or 34.25" height. There are two stainless steel kick plates included.
The 32" height is standard for this appliance. If the height is changed to 34.25", another kick plate
must be installed. To install kick plate for 34.25" height, please follow the instructions below:
1. Remove any items stored inside the drawers.
2. Unplug the appliance.
3. Lay a blanket or something soft down on the floor, and carefully lay the appliance down
on its back side.
4. Remove kick plate for the 32" height by removing the two supporting feet and screws.
5. Reusing the original screws, install the kick plate and supporting feet for 34.25"height,
11