Related Manuals for VYKING FORCE VF2465I
Summary of Contents for VYKING FORCE VF2465I
- Page 1 INSTRUCTION MANUAL PRESSURE WASHER KIT VF2465I To prevent serious injury, read and understand all warnings and instructions before use. Keep these instructions safe for future use.
-
Page 2: Table Of Contents
CONTENTS Key features Safety instructions Proper use Description of appliance Technical specifications Assembly Start up Operation Transportation Storage Care and maintenance Troubleshooting Accessories Warranty... -
Page 3: Key Features
PRESSURE WASHER KIT 2465I KEY FEATURES • MAX PRESSURE: 2465 PSI / 17 Mpa • MAX FLOW RATE: 8.5 L/MIN • MOTOR: 2400 WATT INDUCTION • HOSE: 8 M STEEL BRAIDED • WARRANTY: 2 YEAR IMPORTANT SAFETY INSTRUCTIONS !DSAVE THESE INSTRUCTIONS Please read and comply with these instructions prior to the initial operation of your appliance and store them for later use or subsequent owners. - Page 4 Electric components !DANGER Risk of electric shock. Never touch the mains plug and the socket with wet hands. Check the power cord with mains plug for damage prior to every use. Do not use the machine if a supply cord or important parts of the machine are damaged, e.g. safety devices, high pressure hoses, trigger gun.
- Page 5 PRESSURE WASHER KIT 2465I components. Do not operate appliance with damaged components. High-pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, live electrical equipment or the machine itself. Do not direct the jet against yourself or others in order to clean clothes or footwear. Do not use the appliance within range of other people unless they are wearing protective clothing.
- Page 6 Keep plastic packaging away from children, there is a risk of suffocation! !WARNING According to applicable regulations, the appliance must never be used on the drinking water net without a system separator. Ensure that the connection of your building water installation, on which the high-pressure washer is operated, is equipped with a system separator.
- Page 7 PRESSURE WASHER KIT 2465I Residual risks Even if you are operating this product in accordance with all the safety requirements, potential risks of injury and damage remain. The following dangers can arise in connection with the structure and design of this product: Health defects resulting from vibration emission if the product is being used over long periods of time or not adequately managed and properly maintained.
-
Page 8: Proper Use
—Depending on the application, completely shielded nozzles (e.g. surface cleaner) that significantly reduce the emission of aqueous aerosols can be used for high-pressure cleaning. —The use of such shielding is not possible with all applications. Symbols on the machine The high-pressure jet must not be directed at persons, animals, live electrical equipment or at the appliance itself. -
Page 9: Description Of Appliance
PRESSURE WASHER KIT 2465I product can be used to clean paving slabs or rain gutters. This product may not be used to clean clothing, shoes and other textiles. The water jet should not be directed against persons, animals, any electrical equipment or the product itself. -
Page 10: Technical Specifications
TECHNICAL SPECIFICATIONS Model VF2465I Voltage 220 - 240V~ 50Hz Power 2400 WATT Max Pressure 2465 PSI / 17 Mpa Max Flow Rate 8.5 L/MIN Hose Length Max Inlet Water Pressure 101 PSI / 0.7 Mpa Cable Length Nozzle Set 0°, 15°, 25°, 40°, SOAP NOZZLE... - Page 11 PRESSURE WASHER KIT 2465I 2. Attach hose end on unit to connector on side of hose reel until it snaps into place 3. Slide the trigger gun holder into position 4. To assemble the lance protector Snap the tab into the slot located at the bottom left side of the unit, and then secure in place with one small screw provided...
- Page 12 5. Slide the inlet water nut into inlet water connector position 6. Install the lance Fit the spray wand into the gun and rotate it until the two parts are completely locked 7. Connect the high-pressure hose to the trigger gun...
-
Page 13: Start Up
PRESSURE WASHER KIT 2465I Connect the silver end of the high-pressure hose to the trigger gun and twist the nut as indicated to secure the connection. Attach desired nozzle to end of lance 8. Connect the garden hose to the water inlet Connect the garden hose adaptor (female coupler) to the water inlet of the pressure washer, and then thread your garden hose (male end) into the garden hose adaptor START UP... -
Page 14: Operation
• Unlock the lever of the trigger gun. • Push the lever of the trigger gun, the device will switch on. • Let the device run (max. 2 minutes) until the water exits the trigger gun without bubbles. • Release the lever of the trigger gun. •... - Page 15 PRESSURE WASHER KIT 2465I Connect the product to power and water supply as described. • Open the water supply. • Hold the spray gun with both hands. • Direct the nozzle of the chosen accessory away from you towards the surface to be cleaned.
- Page 16 Fill the tank with detergent designed specifically for use with pressure washers. Push the detergent bottle with the opening pointing downwards into the connection for the hose clean detergent. Recommended cleaning method • Spray the detergent sparingly on the dry surface and allow it to react, but not to dry. •...
-
Page 17: Transportation
PRESSURE WASHER KIT 2465I • Turn off the appliance using the “OFF/ON” switch. • Disconnect the mains plug from the socket. Only separate the high-pressure hose from the trigger gun or the device when there is no pressure in the system. TURN OFF TAP •... -
Page 18: Storage
STORAGE !CAUTION Risk of personal injury or damage! Consider the weight of the appliance when storing it. Storing the appliance • Park the machine on an even surface. • Detach spray lance from the trigger gun. • Unscrew the high pressure hose on the trigger gun. •... -
Page 19: Care And Maintenance
PRESSURE WASHER KIT 2465I • Release the lever of the trigger gun. • Lock the lever of the trigger gun. • Turn off the appliance using the “ON/OFF” switch. • Store the appliance and the entire accessories in a frost-free room. CARE AND MAINTENANCE !DANGER Risk of electric shock... -
Page 20: Troubleshooting
Clean the nozzle with the needle cleaning tool provided. Remove the spray wand from the gun. Remove any dirt from the nozzle hole and rinse. ATTENTION • The cleaning tool must not be damaged. • If it becomes stuck pull the cleaning tool out using flat pliers. TROUBLESHOOTING !DANGER Risk of electric shock. - Page 21 PRESSURE WASHER KIT 2465I Symptom Cause Reccomended Action Machine refuses to start Machine not plugged in Plug in machine Defective socket Try another socket Defective extension cord Switch off other machines Try without the extension cord Fluctuating pressure Pump sucking air Check that hoses and connections are airtight Valves dirty, worn out or stuck...
-
Page 22: Accessories
ACCESSORIES A range of accessories are supplied for this product. Please check the technical specification of any accessories that you purchase to ensure they are compatible with this product. This machine comes complete with a snow cannon, wheel brush & patio cleaner. To install remove lance and screw on accessory adaptor supplied with unit then screw in until the two parts are completely locked into place. -
Page 23: Warranty
PRESSURE WASHER KIT 2465I WARRANTY Thank you for purchasing this Vyking Force product. This warranty is provided by Automotive Brands Group of 76-92 Station Street Nunawading VIC 3131. Ph. +61 3 8878 1111 Except for any defects caused by an accident, misuse, abuse, improper installation or... - Page 24 Automotive Brands Group Pty Ltd. 76-92 Station St Nunawading VIC 3131 VykingForce is a registered trademark of the Automotive Brands Group Pty Ltd. VYKINGFORCE.COM...
Need help?
Do you have a question about the VF2465I and is the answer not in the manual?
Questions and answers