2: Operation
All of the new operating parameters are accessed using button 12 and/or button 13 in Function
mode. These two buttons take you up and down the list of new Function parameters and the
menu wraps around if you press the same key repeatedly. The DX7 remembers the last activated
Function parameter and it is "live" on the panel (data slider and Yes/No buttons) even in normal
"play" mode.
DX7mega128
FUNCTION CONTROL
Memory Bank = 4
FUNCTION CONTROL
Volume Out = 5
FUNCTION CONTROL
Func/Patch= OFF
FUNCTION CONTROL
Func Data INIT?_
FUNCTION CONTROL
MIDI Ch Out = 16
FUNCTION CONTROL
KB Zone Lo = C1
FUNCTION CONTROL
KB Zone Hi = C6
FUNCTION CONTROL
Voice Stack= 2x8
FUNCTION CONTROL
Detune Coarse...
FUNCTION CONTROL
Detune Fine...
Page 4 of 8
www.musictechnologiesgroup.com
User Guide v1.30
Preliminary