Lexmark E330 Quick Reference page 2

Clearing paper jams 4
Lift the flap at the front of the printer and remove any jams
beneath the flap.
When a paper jam occurs, the printer stops and the operator panel's
Paper Jam and Continue lights come on. Press and release
Continue twice quickly to display the specific secondary error
paper jam light sequence. See Common operator panel light
sequences for more information.
We recommend that you clear the entire paper path when a paper jam
occurs.
To clear a paper jam:
1
If you are feeding paper from a tray, remove the tray, and then
remove any jams.
2 Open the front cover and remove the print cartridge assembly.
5
Open the rear exit and remove any jams.
3 Remove any jams in the area behind the print cartridge
6
After you have cleared the jams, reinstall the print cartridge
assembly.
assembly, make sure all printer covers and trays are closed, and
then press Continue
If you need more information
•
Refer to the publications CD that came with your printer for
helpful information about using and maintaining your printer.
•
Contact your administrator or Help desk if you have questions
about network printing.
Operator panel
The operator panel has 5 lights and 2 buttons. The Continue button
also has a light.
Continue
Cancel
Ready
Toner Low / Replace PC Kit
Load Paper
Paper Jam
Error
Press and release: To:
Continue Resume printing
Continue twice quickly Display a secondary error code
Cancel Cancel the job currently printing
Common operator panel light sequences
The operator panel lights mean different things, depending on their
to resume printing.
sequence. Lights that are off, on, and/or blinking indicate printer
conditions such as printer status, intervention, or service.
The table on the right shows the most common light sequences. For
more detailed information about the light sequences, refer to the
publications CD.
Light legend
= On
Common operator panel light sequences
Printer Condition
Continue
Ready
Toner Low /
Replace PC Kit
Load Paper
Paper Jam
Error
*
When the Error (or Paper Jam) and Continue lights are both on, a secondary error has occurred. Press and release Continue twice quickly to display the secondary error code light sequence.
†
Paper jams at the input sensor can be either after the paper leaves the tray and enters the printer or in the manual feeder.
= Blinking
Paper jam secondary error codes*