FujiFilm X-T1 New Features Manual page 14

Changes and Additions
SHOE MOUNT FLASH
■
The following options are
available with optional shoe-
mounted fl ash units.
A
Flash control mode: The fl ash control mode selected with the
fl ash unit. This can in some cases be adjusted from the
camera; the options available vary with the fl ash.
• TTL: TTL mode. Adjust fl ash compensation (
• M: The fl ash fi res at the selected output regardless of sub-
ject brightness or camera settings. Output in some cases
can be adjusted from the camera (
• MULTI: Repeating fl ash. Compatible shoe-mounted fl ash
units will fi re multiple times with each shot.
• OFF: The fl ash does not fi re. Some fl ash units can be
turned off from the camera.
B
Flash compensation/output: The options available vary with
fl ash control mode.
• TTL: Adjust fl ash compensation (the full value may not
be applied if the limits of the fl ash control system are
exceeded). In the cases of the EF-X20, EF-20, and EF-42,
the selected value is added to the value selected with
the fl ash unit.
• M/MULTI: Adjust fl ash output (compatible units only).
Choose from values expressed as fractions of full pow-
er, from 1/1 (mode M) or 1/4 (MULTI) down to 1/512 in incre-
ments equivalent to 1/3 EV. The desired results may not
be achieved at low values if they exceed the limits of the
fl ash control system; take a test shot and check the results.
EN-10
C
MODE
SHOE MOUNT FLASH
ADJUST END
B
).
B
).
D
E
ENGLISH
Flash mode (TTL): Choose a fl ash mode for TTL fl ash control.
• FLASH AUTO: The fl ash fi res only as required; fl ash level is
adjusted according to subject brightness. A p icon
displayed when the shutter button is pressed halfway
indicates that the fl ash will fi re when the photo is taken.
• STANDARD: The fl ash fi res with every shot if possible; fl ash
level is adjusted according to subject brightness. The
fl ash will not fi re if not fully charged when the shutter
is released.
• SLOW SYNC.: Combine the fl ash with slow shutter speeds
when photographing portrait subjects against a back-
drop of night scenery. The fl ash will not fi re if not fully
charged when the shutter is released.
Sync: Control fl ash timing.
• 1ST CURTAIN: The fl ash fi res immediately after the shutter
opens (generally the best choice).
• 2ND CURTAIN: The fl ash fi res immediately before the shut-
ter closes.
• AUTO FP(HSS): High-speed sync (compatible units only).
The camera automatically engages front-curtain high-
speed sync at shutter speeds faster than the fl ash sync
speed. Equivalent to 1ST CURTAIN when MULTI is selected
for fl ash control mode.
Zoom: The angle of illumination (fl ash coverage) for units
that support fl ash zoom. Some units allow the adjust-
ment to be made from the camera. If AUTO is selected,
zoom will automatically be adjusted to match coverage
to lens focal length.