Cal-Royal N-CVRESC Instructions For Use

INSTRUCTIONS FOR N-CVRESC TRIM
FOR N-98CVR / N-77CVR SERIES EXIT DEVICE
N-CVRESC-00
N-77CVR / N-98CVR
chassis
Lockable Nesc
Lever Trim
Key locks &
Unlocks Lever
chassis
centerline
N-CVRESC-30
No Cylinder
Trim Always
Operable
13 function 15 function
Entrance Passage
Attach the collar and Attach nesc case to door
mortise cylinder to the thrubolting the (4) screws
nesc case with mortise to the chassis, allaning
nut, attach case to spindle to hub of the
door thrubolting chassis.
(4)
screws to the chassis,
aligning spindle to hub.
N-CVRESC-40
Pull when
Push bar locked down
Dummy Nesc Lever
Trim
10 function
Dummy
Attach the collar and
dummy cylinder to the
nesc case with mortise
nut, attach case to
door thrubolting (4)
screws to the chassis.
1/2
N-CVRESC-05
Key unlock
Nesc Lever,
Key remained
on Cylinder unless
Locked. Cylinder
Nesc Lever Trim
04 function
Storeroom
Attach the collar and
mortise cylinder to the
nesc case with mortise
nut, attach case to
door thrubolting
(4)
screws to the chassis,
aligning sprindle to hub.
DRWG.# EDG-4014 20220826