Advertisement
SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD
5.4 VFL-Visual fault locator
By injecting the VFL (650nm) into the optical fiber, the position of the leakage light on the
measured optical fiber can be conveniently and accurately judged. It is suitable for the detection
of the near-end failure point and the high loss section caused by micro-bending of bare optical
fiber, optical fiber jumper and other leakage red optical fiber.
5.5 RJ45 Line sequence test
When testing, please access the remote module, the main interface under the selection of RJ45
line sequence module, click OK button to automatically test.
At this point, the LED lights at the bottom of the instrument screen and the remote module LED
lights start flashing sequentially.
Website: www.baudcom.com.cn
Tel: +86 21 37709251
Email: info@baudcom.co
Advertisement
