Advertisement
Click on the "Normal optical power meter calibration" option to select the appropriate
wavelength for user self-calibration. For example: the current 1310nm optical intensity of
-10dBm, "Input standard power value" in the text box filled -10dBm, and then click the "Select
wavelength" option to switch wavelength, and then press "Calibration" to 1310nm wavelength
calibration.
Remarks: instrument factory has been strictly tested, the user self-calibration function,
please use caution, to avoid calibration errors caused test deviation.
7 Maintenance
1. The tester shall operate without appreciable vibration.
2. Keep the output end face clean, if there is dirt damage, should turn down the output flange,
use dust-free paper or cleaning cloth and anhydrous alcohol for end face cleaning.
3. Please cover the dustproof cap when the equipment is not in use.
4. Carefully plug in and pull out the light connector.
5. Handle with care to prevent equipment from falling or bumping.
Common malfunctions
6. If the test state is fiber falling off, the end of the fiber should be cleaned to further
determine this state, so as to avoid false alarm.
7. After connecting optical fiber lines to delay waiting more than 5 seconds time, waiting for
the instrument whether display on-line status, so as to avoid false alarm.
8 Guarantee
We do not suggest the customer to repair the PON power meter by themselves.
1. Our company will provide a product commitment, the warranty period for the date
of shipment within 18 months.
2. When the product purchased during this period is found to have quality problems,
our company will make appropriate repairs or replacement.
3. If the instrument is in use in the process of problems, according to the common
Website: www.baudcom.com.cn
SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD
Tel: +86 21 37709251
Email: info@baudcom.co
Advertisement
