Page 1
® VS TAL Pantry Phillips (PZ 2) “ 13/64 (5 mm) 1/8“ (4 mm) For Face Frame and Frameless Kitchens heavy duty bottom runner for 256 lbs. (120 kg) load capacity max. 35.2 lbs. (16 kg) per basket...
Appropriate fastening material is not supplied with the set. It is the responsibility of the installer to insure the unit is properly installed and securely fastened to wall studs. VAUTH-SAGEL VS TAL ® Pantry...
Page 3
® VS TAL Pantry VAUTH-SAGEL VS TAL ® Pantry...
Page 4
VS TAL ® Pantry Face Frame c e r S p a For faceframe installation a spacer needs to be installed at the cabinet ceiling so the installation level is flush with the face frame. Euro-Style VAUTH-SAGEL VS TAL ® Pantry...
Page 5
Please install top runner first. These two positions ø 1/5" for locator pins (5 mm) must be drilled! 1/8" x 5/8" (4 x 16 mm) VAUTH-SAGEL VS TAL ® Pantry...
Page 6
VS TAL ® Pantry Face Frame c e r S p a For faceframe installation a spacer needs to be installed at the cabinet floor so the installation level is flush with the face frame. Frameless VAUTH-SAGEL VS TAL ® Pantry...
Page 7
1/8" x 5/8" (4 x 16 mm) 1/8" x 5/8" (4 x 16 mm) VAUTH-SAGEL VS TAL ® Pantry...
Page 8
VS TAL ® Pantry Center of door Door overlay X 1/8" x 5/8" M1/4" x 1-1/8" (4 x 16 mm) (M6 x 28 mm) VAUTH-SAGEL VS TAL ® Pantry...
Page 9
Adjust the internal height of frame! Z = X - 5-1/2" (Z = X - 139 mm) Z = internal height of frame X = internal height of cabinet Tighten the screws! VAUTH-SAGEL VS TAL ® Pantry...
Page 10
1/8" x 5/8" (4 x 16 mm) VAUTH-SAGEL VS TAL ® Pantry...
Need help?
Do you have a question about the VS TAL Pantry and is the answer not in the manual?
Questions and answers