Table of Contents
Advertisement
2-2 ACPI Settings/WakeUp Event control
System ACPI Parameters and Wakeup event control.
2-2-1 Enable Hibernation
This item enables or disables system ability to Hibernate (0S/S4 sleep state). This option may not
be effective with some 0Ss.
2-2-2 ErP Control
When ErP Enabled. System meets ErP requirment. All wake up events do not work except Power
Button after power down system(S5).
2-2-3 ACPI Sleep State
This item selects the highest ACPI sleep state the system will enter when the SUSPEND button is
pressed.
2-2-4 Restore AC Power Loss
Specify what state to go to when power is re-applied after a power failure.
2-2-5 PME Wake up from S5
The item enables the system to wake from S5 using PME event.
2-2-6 Wake system with Fixed Time
This item enables or disables the system to wake on by alarm event. When this item is enabled,
the system will wake on the hr::min::sec specified.
2-2-7 Wake up date/ hour/ minute/ second
Wake up date
You can choose which date the system will boot up.
Wake up hour / Wake up minute / Wake up second
You can choose the system boot up time, input hour, minute and second to specify.
X670E VALKYRIE
2. Advanced Menu | 13
Advertisement
Table of Contents
