Daikin RKM18PVMK Removal Procedure page 23

Si001559E
Step
2 Remove the protection
bushing.
3 Disconnect the
compressor lead wires
and the overload
protector.
4 Heat up the brazed part
of the discharge side
pipe and disconnect it.
5 Heat up the brazed part
of the suction side pipe
and disconnect it.
6 Remove the 3 nuts.
7 Lift up the compressor
and remove it.
Removal Procedure
Procedure
Protection bushing
Overload
protector
Brazed part of the
discharge side pipe
Compressor
U (red)
V (yellow)
W (blue)
(R22244)
Brazed part of the
suction side pipe
(R22246)
Nut
Compressor
Points
21