Advertisement
Available languages
Available languages
7.1.2 Setting of the 12 and 24 hours display
• In the setting mode you can choose between the 12 - and 24 hour system.
• In the 12 HR system AM or PM (after 12 o'clock) appears on the display.
7.1.3 Snooze time setting
• In the setting mode you can set the snooze time from 5 min to 60 min.
7.2 Setting of the alarm time
SET
• Press the
button into ALARM mode, "A1" words displayed,and 6:00 AM default.press again
AL SET
"A2" words displayed, and 0:00 AM default.
• When display "A1" or "A2" ,hold the
• The setting sequence is shown as follows: Hour - Minute.
• Press the
or
• Press and hold the
• Confirm the setting with the
• Press
button to turn on or off alarm function.
• When the icon
1
or
•
: Alarm 1 ,
:Alarm 2.
2
1
7.3 Backlight
•Attention: Backlight in continuous operation only works with USB power connected.
• Press any button to turn on backlight for 8 seconds when use battery.
7.4 Display of pressure
• In the normal mode hold
• Unit of pressure " HPA " and "INHG".
SET
button for 3 seconds to set alarm time.
AL SET
button to increase or decrease for setting.
or
button for fast running.
SET
button or no button pressed in 15 seconds.
AL SET
2
of alarm is diaplayed, it means that alarm function is turn on.
MEM
button for 3 seconds,it can switch the unit pressure.
inHG·hPa
Advertisement
