Pisla 70100030 Instruction Manual page 41

Please take note of the following:
• The recommended distance to any interfering sources like computer monitors or TV sets at least
1.5-2 meters.
• Inside ferro-concrete rooms (basements,superstructures),the received signal is naturally weakened.
In extreme cases, please place the unit close to a window to improve the reception.
• During night-time, the atmospheric interference is usually less severe and reception is possible in
most cases.A single daily reception is adequate to keep the accuracy deviation under 1 second.
7. Operation
• During the operation, all successful settings will be confirmed by a brief beep tone.
• The device will automatically quit the setting mode if no button is pressed for a long period of time.
• Press and hold the
7.1 Manual settings
SET
• Hold the button in normal mode for three seconds, to enter the setting mode.
AL SET
• The setting sequence is shown as follows: Time Zone - 12 or 24 hours system (24H default)
- Hour - Minute - Year - Month - Day - Language of week.
• Press the or
• Press and hold the
• Confirm the setting with the
• The manually set time will be overwritten by the DCF time when the signal is received successfully.
7.1.1 Setting of the time zone
• In the setting mode you can make the time zone correction (-1 , 0 , +1).
• The time zone correction is needed for countries where the DCF signal can be received.
or button in the setting mode for fast running.
button to increase or decrease for setting.
or button for fast running.
SET
button or no button pressed in 15 seconds.
AL SET