Using Your Easy Kettle - Dash DEZK003 Instruction Manual

WARNING: Never fill the Kettle above the Max 1.7L marker. Exceeding 1.7L can result
in electric shock.
Use extreme caution when pressing the Lid Release Button as the Lid opens quickly and
•
escaping steam may cause personal injury.
Place the appliance on a level surface and ensure that the power cord is not hanging over any
•
tabletops or counter spaces.
Open the Lid, fill the Kettle with water (ensure that the water level rises above the MIN line on
•
the Kettle and remains below the MAX line), and close the Lid.
Place the Kettle on the Power Base, press the Power Switch and the Indicator Light will illuminate
•
to signal that the Kettle is heating up.
When the Kettle is heating the water, do not remove the Kettle from the Power Base.
•
After the water begins to boil, the Power Switch and the Indicator Light will shut off
•
automatically.
Remove the Kettle from the Power Base. If you need to boil the water again, wait for 30-60
•
seconds before pressing the Power Switch.
When finished using this product, place the Kettle on the Power Base and unplug the appliance.
•
The power cord can be concealed by wrapping it beneath the Power Base.

USING your easy kettle

using your easy kettle ∙ 11