Table of Contents
Advertisement
setting up your Rapid kettle
WARNING:
The Rapid Kettle and its Power Base are NOT dishwasher safe.
ATTENTION:
Do not use abrasive scrubbers, sponges, or chemical cleaners as
they will damage the appliance.
1.
Clean your Rapid Kettle thoroughly before using. Always unplug the appliance prior
to cleaning or storing.
2.
Remove all packaging material and stickers, and sterilize your Kettle before first use.
3.
Using a dish brush, wash the inside of the Kettle with warm, soapy water.
4.
Fill the Kettle to the MAX line, place on the Power Base, and turn on. Once the Kettle
automatically turns off, carefully discard the boiling water. This sterilizes the Kettle.
8 ∙ setting up your rapid kettle
WARNING:Never fill the Kettle above the Max 1.7L marker. Exceeding 1.7L can result
in electric shock.
1.
Press the Lid Release Button to open the Lid.
2.
Fill the Kettle with water. Make sure not to exceed the Max 1.7L mark. Close the Lid.
3.
Put the Power Base on a stable surface. Plug the cord into a power outlet.
4.
Place the Kettle on the Power Base and push down the On/Off Button to turn the appliance on.
The Indicator Light will illuminate signaling that the Kettle has started heating up.
5.
Once the water comes to a boil, the Kettle will automatically turn off. To serve, grasp the Handle,
lift the Kettle off of its Power Base and tilt to pour.
USING your Rapid kettle
using your rapid kettle ∙ 9
Advertisement
Table of Contents
