Dash DETK300 - Insulated Electric Kettle Manual

SAFETY FEATURES

Cord Storage
Wrap the cord around the Cord Storage under the Base so the Insulated Electric Kettle stores without additional cord clutter.

Boil-Dry Safety Protection
The Kettle will shut off automatically in approximately 20 seconds when there is little to no water inside.

Cool-Touch Housing
Because of the Dual-Wall Insulation, the Insulated Electric Kettle stays cool even when the water inside is heated to boiling.

Setting Up Your Insulated Electric Kettle

Clean your Insulated Electric Kettle thoroughly before using. Always unplug the appliance prior to cleaning or storing.

The Insulated Electric Kettle and its Power Base are NOT dishwasher safe.

BEFORE FIRST USE
Remove all packaging and stickers before using your Insulated Electric Kettle.
Using a dish brush, wash the inside of the Kettle with warm, soapy water and then rinse thoroughly.

To sterilize the Kettle, fill with water to the MAX line and place on the Base. Press the Boil/Cancel Button and wait until the water is boiling. Once water is boiling, discard water and allow the Kettle to cool.

ATTENTION: Do NOT use abrasive scrubbers, sponges, or chemical cleaners on the interior or exterior of the Kettle as they will damage the finish.

The bottom of the Insulated Electric Kettle functions as a wrap for cord storage. Unwind the cord for greater flexibility.

Switching between °C and °F
To switch between °C and °F, simply hold down both the Temp (+) and Temp (-) Buttons simultaneously until you see the symbol change on the Digital Display.

USING Your Insulated Electric Kettle

PREPARING THE KETTLE

To add water to the Insulated Electric Kettle, pinch the Lid Release Buttons on the Lid and lift (photo A). Fill with water to MAX line (photo B). Do not overfill. Replace the Lid to close.

Place the Kettle on the Power Base and plug the Power Base in.

Do not add liquid other than water to the Insulated Electric Kettle, as this may damage the interior.

BOILING

To boil water, Press the Boil/Cancel button to turn the Kettle on (photo C). This will cause the Kettle to begin to heat to boiling, or 212°F.

HEATING

To heat to a temperature other than boiling, once the Insulated Electric Kettle is plugged in simply press the Temp (+) and Temp (-) Buttons until your desired temperature is shown on the Digital Display (photo D), then do not press any further buttons to confirm. The kettle will automatically build to the desired temperature you selected. "Heat" will be shown on the Digital Display.

CHANGING THE TEMPERATURE

You can also use the Temp (+) and Temp (-) Buttons to change the temperature once heating has begun. When not changing the temperature, the Digital Display will show the internal temperature of the water as it is heating.

KEEP WARM

Once heating is complete, you can press the Keep Warm button to help the Insulated Electric Kettle maintain internal temperature (photo E). Due to the Dual-Wall stainless steel insulation, the Insulated Electric Kettle will retain heat for up to 8 hours, even when not using the Keep Warm function.

SERVING

To serve, remove the Insulated Electric Kettle from the Power Base and press down on the Pour Lever on top of the handle as you are pouring to open the Pour Spout (photo F).

TURNING THE KETTLE OFF

The Insulated Electric Kettle will automatically shut off once desired temperature is reached if Keep Warm is not selected. Alternatively, you can simply unplug the base to make sure the Insulated Electric Kettle is off.

CLEANING & MAINTENANCE

Be careful when cleaning the Insulated Electric Kettle, as even if the outside is cool, the contents within may still be hot, even if the kettle is no longer on.

In order to keep your Insulated Electric Kettle in pristine working order, follow the cleaning recommendations periodically.

1. Fill the Kettle with water up to the 1L mark. Place on the Power Base and press the Power Button to turn on.
2. After the water comes to a boil, remove from the Power Base. Pour in a small amount of dish soap and soak overnight or for 8-12 hours.
3. Pour out the soapy water and rinse until no suds remain.
4. Fill the Kettle with 1L of clean water and bring to a boil. Carefully pour out the hot water.
5. Allow your Kettle to cool and then thoroughly dry with a soft cloth.

Note: Make sure that the Kettle, Power Base and cord are completely dry before and after each use. After using the kettle for a long period of time, you may notice residue from hard water accumulate on the bottom interior of the Kettle. To remove, let soak with water and vinegar, then wipe down.

CUSTOMER SUPPORT

Dash values quality and workmanship and stands behind this product with our Feel Good Guarantee^™. To learn more about our commitment to quality, visit bydash.com/feelgood.

Our US-based customer support team is at your service Monday - Friday during the times below.
Reach us at 1 (800) 898-6970 or support@bydash.com

Hey Hawaii! You can reach our customer service team from 5AM to 5PM.
And also, Alaska, feel free to reach out from 6AM - 6PM.

REPAIRS

Risk of electric shock! The Insulated Electric Kettle is an electrical appliance.

Do not attempt to repair the appliance yourself under any circumstances.

Contact Customer Support regarding repairs to the appliance.

TECHNICAL SPECIFICATIONS

Model: DETK300

Voltage: 120V ~ 60Hz

Power Rating: 1500 W

Stock#: DETK300_20200214_V4

IMPORTANT SAFEGUARDS

IMPORTANT SAFEGUARDS: PLEASE READ AND SAVE THIS INSTRUCTION AND CARE MANUAL.

When using electrical appliances, basic safety precautions should be followed, including:

• Read all instructions.
• Remove all bags and packaging from the appliance before use.
• Wash and dry Kettle before using for the first time.
• Only use water inside the Electric Kettle. Other pre-made beverages may damage the interior coating.
• Make sure that the Kettle, Power Base and cord are completely dry before each use.
• Prior to first-time use, boil water in the Kettle and then pour it out. This will help to eliminate any odors.
• For maintenance other than cleaning, please contact StoreBound directly at 1-800-898-6970 from 7AM – 7PM PT Monday – Friday or by email at support@storebound.com.
• To prevent the risk of fire, electric shock, or personal injury, do not place the cord, plug, or unit near water or other liquids.
• 
  To avoid electric shock, do not overfill the Kettle. Water level should never go above the Max 1.7L marker.
• Never immerse the Power Base or Kettle in water or any other liquid; instead, wipe the surface with a soft, damp cloth, and properly clean the inside of the Kettle (see Cleaning & Maintenance instructions).
• Never leave appliance unattended when in use.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they are provided with supervision and instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Always be sure to unplug the appliance from the outlet prior to assembly, disassembly, cleaning, and storage.
• Allow Kettle to cool completely before cleaning or storing.
• Do not operate any appliance with a damaged cord or plug.
• Do not use the appliance if any of the parts are damaged.
• Refrain from using attachments that are not recommended by the appliance manufacturer, as this may result in fire, electric shock, or personal injury.
• Do not use appliance outdoors or for commercial purposes.
• Do not let the cord touch hot surfaces or hang over the edge of tables or counters.
• Extension cords are not recommended for use with this appliance.
• If an extension cord must be used, make sure the electrical rating of the wire is compatible with the Kettle.
• Do not place the appliance on or near a hot gas burner, hot electric burner, or in a heated oven.
• When disposing of the Kettle, do not discard with general household waste; instead, drop off at a designated electronic waste recycling facility.
• StoreBound shall not accept liability for damages caused by improper use of the appliance.
• Improper use of the Kettle can result in property damage or even in personal injury.
• This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not completely fit in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.