Table of Contents
Advertisement
Service Information TV 02/01
- Select the desired software under software download.
- Copy the selected device software into the folder C:\GRUNDIG\Software of
your PC which has been created when installing the F-Prog 1-PC software.
The downloaded packed file (*.zip) then must be unpacked by an appropriate
unpacker for „ZIP" files (appropriate unpackers can be found, for example,
under www.winzip.com).
ZIP files cannot directly be loaded into the TV set!
Additional hints/particularities for programming with the „F-PROG 1":
- Before connecting the Flash Programmer, switch the TV set off with its
mains button then connect the programmer when the operating LED
has gone out!
- After starting programming, the operating LED first remains dark then
starts flashing as soon as the Flash memory is deleted.
3/3
Advertisement
Table of Contents
