Subscribe to Our Youtube Channel
Related Manuals for Envirotainer CryoSure X1
Summary of Contents for Envirotainer CryoSure X1
- Page 1 CryoSure ® systems User Manual X1, X2, X5, X11 Doc No. UM-CRYO-3030 Version 2 www.envirotainer.com Doc No: Revision: State: Release Date: Approved By: UM-CRYO-3030 Released 2021-12-01 hanst...
- Page 2 • Removed UN3373 information. Only applicable for customer when adding bio- logical substance category B. • Added UN3481 information. If system is equipped by Envirotainer with a track- er, the safety sticker will be added from the start. • 3.3 Monitor the autonomy duration left on your CryoSure® system replaces chapter “Remaining dry ice time”...
-
Page 3: Table Of Contents
TABLE OF CONTENTS INTRODUCTION.......................... 1 Overview ..........................1 1.1.1 Payload........................2 Technical details........................3 Intended use ..........................4 Contact............................4 Operating conditions.........................4 SAFETY............................5 Shipping regulations .........................5 Symbols on the CryoSure® system....................5 Cleanliness of product ......................5 USING THE CRYOSURE® SYSTEM..................6 Preparing a shipment........................6 Operating instructions.......................6 3.2.1 Product loading......................7 3.2.2... - Page 4 Intentionally left blank Doc No: Revision: State: Release Date: Approved By: UM-CRYO-3030 Released 2021-12-01 hanst...
-
Page 5: Introduction
These systems will be pre-charged with dry ice at an Envirotainer facility and be delivered to a second location where temperature-sensitive materials can be loaded into the dewar for transit or storage. -
Page 6: Payload
1.1.1 Payload 1.1.1 PAYLOAD Table 2 Vials configuration CryoSure ® 2 mL vials configuration # of 2 mL vials version CryoSure ® Canister holding 2 bags; 10 vials/bag Canister holding 16 canes without sleeves; 5 vials/cane CryoSure ® Canister holding 14 canes with sleeves; 5 vials/cane Canister holding 60 canes without sleeves;... -
Page 7: Technical Details
1.2 Technical details 1.2 TECHNICAL DETAILS A complete CryoSure ® system is comprised of the following components: Fig. 1 The CryoSure ® system. Table 3 CryoSure ® system features Pos Name Description Cylindrical stainless-steel container with handle for loading materials into, Product holder removing materials from, or holding materials within the storage zone of (standard for X2 or X5) -
Page 8: Intended Use
No pathogenic Category A materials (UN 2814, UN 2900) or medical or clinical wastes (UN 3291) shall be used with the CryoSure ® systems. 1.4 CONTACT For contact information to our operations centers, refer to www.envirotainer.com. For questions regarding this manual or the CryoSure ® systems, send an e-mail to support@envirotainer.com. 1.5 OPERATING CONDITIONS... -
Page 9: Safety
® system is equipped with a tracker, a safety sticker will be added by Envirotainer° to the system. Any other tracker or data logger added to the system by the customer, containing Lithium batteries, must be equally declared. 2.3 CLEANLINESS OF PRODUCT The CryoSure ®... -
Page 10: Using The Cryosure® System
3.2.3 Product unloading. Returning/shipping CryoSure ® system to Envirotainer/new destination, 3.2.4 Returning of the system. • Remove any biological product materials and associated packaging from the dewar. • Remove old labels and documents. • Prepare new labels and documents for cardboard box. -
Page 11: Product Loading
3.2.1 Product loading 3.2.1 PRODUCT LOADING Inspect the outer packaging. If the cardboard box is too worn for use, contact Envirotainer for support. Refer to 1.4 Contact Fig. 3 Opening the box: 2a. Open the box and set aside the top foam. - Page 12 3.2.1 Product loading Fig. 5 Place the following items back in place: 4a. lid (wearing safety gloves) 4b. tracker and probe (if any) 4c. top foam. 8 (14) Doc No: Revision: State: Release Date: Approved By: UM-CRYO-3030 Released 2021-12-01 hanst...
-
Page 13: Shipping Of Loaded Product
3.2.2 Shipping of loaded product 3.2.2 SHIPPING OF LOADED PRODUCT IMPORTANT! After the dewar has been loaded with product and properly packaged with all required components, labels need to be applied to the exterior of the cardboard box in accordance with government (e.g., US DOT, EU ADR) regulations and carrier (e.g., IATA) requirements. -
Page 14: Product Unloading
3.2.3 Product unloading 3.2.3 PRODUCT UNLOADING Fig. 7 Unpacking: 1a. Open the box and set aside the top foam. IMPORTANT! DO NOT DISCARD THE FOAM 1b. Wearing safety gloves, remove lid. Place the lid to one side. CAUTION! DO NOT DISCARD THE LID Fig. -
Page 15: Returning Of The System
3.2.4 Returning of the system 3.2.4 RETURNING OF THE SYSTEM If you have booked a pick-up service from Envirotainer, a prepaid shipping return label is included in a folder on the inside of the cardboard box. If you have not pre-booked the pick-up service, contact Envirotainer support to place an order for the service. -
Page 16: Monitor The Autonomy Duration Left On Your Cryosure System
CryoSure ® orders. However, information in DuraWatch ® is non-sensitive. For any detailed information around a CryoSure ® order you still need to login to the Envirotainer Portal. 12 (14) Doc No: Revision: State: Release Date: Approved By: UM-CRYO-3030... - Page 17 Intentionally left blank 13 (14) Doc No: Revision: State: Release Date: Approved By: UM-CRYO-3030 Released 2021-12-01 hanst...
- Page 18 Envirotainer AB www.envirotainer.com Doc No: Revision: State: Release Date: Approved By: UM-CRYO-3030 Released 2021-12-01 hanst...
Need help?
Do you have a question about the CryoSure X1 and is the answer not in the manual?
Questions and answers