Table of Contents
Advertisement
Using your DAB/FM Radio
Let's get started
4. Turn the SCROLL knob to select the duration (90, 60, 45, 30, 15 minutes) of choice and press
the SELECT button to confirm. The alarm source will be displayed.
5. Turn the SCROLL knob to select the alarm source (Buzzer, DAB or FM) of choice and press the
SELECT button to confirm. If a radio source is displayed the radio source will now be displayed.
6. Turn the SCROLL knob to select the wake up station (last station listened to or DAB / FM preset)
of choice and press the SELECT button to confirm. The alarm frequency will now be displayed.
7.
Turn the SCROLL knob to select the alarm frequency (Daily, Once, Weekend, Weekdays) and
press the SELECT button to confirm. If 'once' is selected then use the SCROLL knob to set
the date that the alarm is to activate. Use the SELECT button to move to the next field in each
case. When the date is set, the alarm volume will now be displayed.
8. Turn the VOLUME knob to select the desired wake up volume and press the SELECT button to
confirm. The alarm status will now be displayed.
9. Turn the SCROLL knob to select the status of choice (Off or On) and press the SELECT button
to confirm. This completes the set up procedure for the wake up mode.
Note:
To set the wake up options for the second alarm, follow the above procedure using 'Alarm 2' from
the alarm menu.
ACTIVATING AND USING THE ALARM (in standby mode only)
1.
Switch the radio into standby mode.
2. Press the ALARM button to display the current status of the alarms (e.g. Alarm 1: on and Alarm
2:off).
3. Press the button again to change the status to the next one in the sequence below until the
status of choice is displayed. Press the SELECT button to accept. An active alarm is indicated
by a corresponding alarm icon (bell) in the display.
fig.15
4. Once the alarm has been set and activated, and when the time on the clock is the same as the
alarm time that has been set, the alarm will sound and the volume will gradually increase to the
one that has been set.
5. The alarm will continue to sound and stop automatically after the time interval that has been
set (Setting the alarm step 4 above). To silence the alarm, press the STANDBY (
repeat alarm has been set, the alarm indicator will remain illuminated and the alarm will sound
again at the next programmed day (Setting the alarm step 7) unless the alarm has been turn off.
6. To activate the snooze function, press the DIMMER / SNOOZE button
when the alarm sounds. The alarm will silence, the display will show
the clock, the snooze interval remaining and the (Zz) indicator (fig. 16).
The alarm will sound again after approximately five minutes.
22
) button. If a
fig.16
Advertisement
Table of Contents
