Table of Contents
Advertisement
CP400 Depth of Drive Adjustment
Unscrew Hex bolt on the very front of the nozzle with 4mm allen key. (Image D)
•
•
Pull tip out to your desired depth and tighten hex bolt with 4mm allen key.
Clearing
•
In the off chance there is a staple jam, disconnect the hose from the compressor before you perform any
action.
•
Unscrew both hex bolts on the nozzle off the gun with a 5mm allen key drive (Image E)
Unscrew hex bolt connecting the handle to the magazine with a 5mm allen key drive (Image F)
•
•
Seperate magazine from gun
•
Remove staple using needle nose pliers (Image G). Assemble magazine to gun back together before
further use
(Image D)
(Image F)
(Image E)
(Image G)
delfast.com
5
Advertisement
Table of Contents
