Table of Contents
Advertisement
Thank you for buying this Delfast Fastenings tool. It has been designed, built
and tested according to all current norms and laws. These include European
Directive 89/392 and subsequent amendments, EN 292, EN 792-13 and
ANSI ISANTA SNT-101-1993.
BEFORE STARTING TO USE THIS TOOL OR BEFORE CARRYING
OUT MAINTENANCE, PLEASE READ CAREFULLY ALL THE
INFORMATION CONTAINED IN THIS MANUAL AND THE
ENCLOSED PARTS DIAGRAM WHICH IS AN INTEGRAL PART OF
IT, AND CONSERVE THESE FOR FUTURE REFERENCE.
CORRECT AIR PLANT AND
CORRECT INSTALLATION OF THE TOOL
It is very important for the proper functioning of the tool that the air plant be correctly positioned and produces
clean, dry, filtered compressed air in the right quantity and at the right pressure.
Never attempt to use oxygen, combustible gases or any bottled gas under pressure as an energy source for the
tool. It will explode, causing serious injury and/or death.
Never exceed the maximum recommended working pressure of 8.9 bar (130 psi).
Never connect the tool to an air line whose pressure may potentially exceed 9.3 bar (135 psi) should the in-line
pressure regulator fail.
|
Freephone. 0508 782 753
Email. sales@delfast.com
2
Advertisement
Table of Contents
