Table of Contents
Advertisement
Multi-inlet dose controller with a compulsory rinsing device.
1
Retention tank
Pump
2
Liquid detergents
3
4
Water
Soap box rinsing electrovalve
5
6
Dose controller
15.2 Electrical liquid detergents' connection
Electrical installation must be carried out by an authorized personnel.
The A8 output relay card allows to connect from 1 to 16 electrovalves of liquid detergents.
The card is situated in the electric box.
Carry the connection cables by the partition crossing and the cable through of the machine.
To connect the wires on the J802 terminal block, introduce a screwdriver in the upper aperture to open the cable
clamp.
Installation manual
7
8
9
10
11
12
3 way valve
Scoops + Rinsing
Water
Washer extractor
Toward retention tank
Retention tank
33
d2032
Advertisement
Table of Contents
