Table of Contents
Advertisement
14
4 Handling
It is obligatory that all these operations are undertaken by handling specialists.
Before any handling, check that the four transport locks fitted are still in place and well-tightened.
To do so, remove the front and rear casings and check presence of four locks (B).
4.1 Lifting with a fork-lift truck
You should never handle the machine in its longitudinal side (any other than shown on the drawing below) with a
fork-lift truck. Important risk of parts deterioration for those fixed under the machine.
This can be carried out from the front or back, at the centre of the machine.
4.2 Lifting with handlings straps
Lifting in that case can only be done with handling straps (minimum capacity 1000 daN / 2200 lb) which bear weight
of the machine.
Remove the top cover and pass the straps in the lifting holes.
Installation manual
Important
Warning
Advertisement
Table of Contents
