Table of Contents
Advertisement
Never handling the machine without the transportation bridles.
13 Drain connection
The machine's exhaust sleeve outside diameter is of 75 mm (3"). It is located underneath the machine.
The waste water collector diameter 150 mm (6") (manufactured by customer) should have a 3 cm/m (3 %) slope and
resist to a temperature of 90 °C (194 °F). It should be connected to the waste water general network in accordance
with local codes and regulations.
Adapt and connect the machine's exhaust sleeve to the waste waters' collector (rubber bend and connection nozzle
are supplied in the machine with collars).
Drawing of drain connection to waste waters' collector
1. Connect the hose (B) to the connect nozzle (C).
2. Seal and fix the nozzle (C) using 2 screws.
3. Them connect the hose (B) to the drain's evacuation sleeve (A).
A
Drain's evacuation sleeve
B
Connection hose
C
Connection nozzle
D
Waste water collector
Installation manual
Important
29
Advertisement
Table of Contents
