Table Of Contents - Daewoo TAPER 40 Operation Manual

3.7 Inspection/adjustment/maintenance
The operating step which is necessary on machine inspection and maintenance is explained here.
Please always refer to machine instruction manual because the operation of each device is
strongly related with the machine state.
<Contents>
Item
3.7.1 General alarm state reset
3.7.2 Tool change step execution
3.7.3 Manual rotation of tool change motor
3.7.4 Mynx series ATC alarm reset
3.7.5 OT(Over travel) alarm reset
3.7.6 Axis emergency stop reset
Inspection/adjustment/maintenance
3. Operation
Description
3 - 23
Remark
- Basic step to reset alarm
- Operation to check ATC motion
- Operation to reset ATC trouble
- ATC Interlock alarm reset
- Operation to reset over travel alarm
- Operation to reset axis emergency stop
Page
3 - 24
3 - 25
3 - 28
3 - 29
3 - 33
3 - 34
VMCTOPES8D51