Safety Precautions Read this manual carefully before use, and retain it for future reference. Do not put anything other than dry pet food into the food compartment, otherwise, it may cause the feeder to malfunction and could even compromise the safety of your pet. To prevent your pet from knocking over the feeder, it is recommended to place the feeder in a corner or against a wall.
Product Overview Cover Desiccant Cartridge Dispense Button Safety Lock Food Compartment Wi-Fi Indicator Dispensing Indicator Remaining Food Indicator Main Body Food Outlet Power Cord Storage Compartment Stainless Steel Bowl Food Bowl Battery Cover (At the Bottom) Note: Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements.
How to Install 1. Remove the Cover Press the safety lock on the back of the feeder and lift the cover. 2. Install the Desiccant Cartridge Remove the cover and install the desiccant cartridge onto the recessed area of the cover. Then rotate the desiccant cartridge until its triangle mark is aligned with the mark .
3. Schedule a Feed After connecting the feeder to the Mi Home/Xiaomi Home app, you can schedule feeds in the app, including setting the dispensing time and the quantity of food.
Page 7
Supported Shapes Not Supported Shapes Triangle Square Crescent Pentagon Oval Round Suitable for pet food with a diameter of 5–12 mm Note: Do not use freeze-dried or special-shaped pet food (including but not limited to the above examples), or pet food in large diameter, to prevent the feeder from malfunctioning or being damaged. Install the Spare Ba eries Unscrew and open the battery cover on the bottom of the feeder.
Indicator Description Indicator Name Indicator Status Feeder Status Blue Online Wi-Fi Indicator Blinking blue Awaiting connection Orange O ine White Dispensing Dispensing Indicator Continuously blinking orange Cover not closed Dispensing error, please clean Orange the dispensing tube Plenty of food remaining Remaining Food Indicator Insu cient food, please re ll...
Page 9
Rese ing the Wi-Fi & Restoring Factory Se ings Use a needle-shaped object to press and hold the Wi-Fi reset button for two seconds. When the Wi-Fi indicator blinks blue, the Wi-Fi has been reset successfully, and the feeder has been restored to factory settings. Note: The data will be cleared after reset.
Page 10
Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and then follow prompts to add your device. * The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default.
Care & Maintenance 1. Open the cover and remove the food compartment. Rotate the dispenser tray at the bottom of the food compartment to remove the tray. Then remove the food bowl. 2. Clean the dispensing tube with a cloth or brush to keep it clean and clear. 3.
Specifications Capacity Name Xiaomi Smart Pet Food Feeder 3.6 L XWPF01MG-EU Net Weight 3 kg Model Color Power Cord Length 1.5 m White Input Rated Power 5.9 W 5.9 V 1.0 A Item Dimensions Operating Humidity Operating Temperature 10%–90% RH 311 ×...
Regulatory Compliance Information Europe-EU declaration of conformity Hereby, Beijing Kitten&Puppy Technology Co., Ltd. declares that the radio equipment type XWPF01MG-EU is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html.
Page 14
Manufactured for: Xiaomi Communications Co., Ltd. Manufactured by: Beijing Kitten&Puppy Technology Co., Ltd. (a Mi Ecosystem company) Address: Room Q-101, Floor 2, Q Area, Anning Zhuang Back Street, Haidian District, Beijing, China For further information, please go to www.mi.com Importer: Beryko s.r.o.
Need help?
Do you have a question about the XWPF01MG-EU and is the answer not in the manual?
Questions and answers