JVC KW-XG812 Instructions Manual page 17

Symptom
Disc cannot be played back.
• CD-R/CD-RW cannot be played
back.
• Tracks on the CD-R/CD-RW
cannot be skipped.
Disc can neither be played back
nor ejected.
Disc sound is sometimes
interrupted.
"NO DISC" appears on the display. Insert a playable disc into the loading slot.
"PLEASE" and "EJECT" appear
alternately on the display.
Disc cannot be played back.
Noise is generated.
A longer readout time is required
("READING" keeps flashing on the
display).
Tracks do not play back in the
order you have intended them
to play.
The elapsed playing time is not
correct.
"NO FILE" appears on the display. Selected folder is an empty folder *. Select another
"NOT SUPPORT" appears on the
display and track skips.
The correct characters are not
displayed (e.g. album name).
Remedy/Cause
Insert the disc correctly.
• Insert a finalized CD-R/CD-RW.
• Finalize the CD-R/CD-RW with the component which
you used for recording.
Eject the disc forcibly. (See page 3.)
• Stop playback while driving on rough roads.
• Change the disc.
• Check the cords and connections.
Press 0, then insert a disc correctly.
• Use a disc with MP3/WMA tracks recorded in a format
compliant with ISO 9660 Level 1, Level 2, Romeo, or
Joliet.
• Add the extension code <.mp3> or <.wma> to the
file names.
Skip to another track or change the disc. (Do not add
the extension code <.mp3> or <.wma> to non-MP3 or
WMA tracks.)
Do not use too many hierarchical levels and folders.
The playback order is determined when the files are
recorded.
This sometimes occurs during playback. This is caused
by how the tracks are recorded on the disc.
folder that contains MP3/WMA tracks.
* Folder that is physically empty or folder that contains
data but does not contain valid MP3/WMA track.
Skip to the next track encoded in an appropriate
format or to the next non-copy-protected WMA track.
This unit can only display letters (upper case), numbers,
and a limited number of symbols. (See page 7.)
ENGLISH 17