Rear Panel
MIDI IN/OUT Port
The MIDI ports are used to communicate with external MIDI modules and controllers. The OUT port transmits
data and the IN port receives data.
To use the SP7 as a MIDI controller to trigger other MIDI devices or sound modules, use a MIDI cable to
connect the SP7's MIDI OUT port to the MIDI IN port of the module you want to control.
If you want to use an external MIDI controller or device to control the SP7, use a MIDI cable to connect the
SP7's MIDI IN port to the MIDI OUT port of the external controller or device you want to use.
DC Power Jack
Connect the power adapter to the DC power Jack.
Note: Please use the supplied DC power adapter (15V, 2.5A). Using the wrong DC power adapter may cause
damage to the product.
If the adapter is damaged or the adapter is lost, please contact your Kurzweil dealer.
Power Button
You can turn the power on or off by pressing the POWER button.
10
GETTING STARTED GUIDE