Table of Contents
Advertisement
ZÄHL HM1 MANUAL V 1.0
APPLICATION EXAMPLES
Conventional
Example for a conventional setup as headphones amplifier:
Your reference DAC at Input A and an analogue source at Input B
Preamplifier in minimalist system
Headphones connected to amplifier output, speaker amps or active speakers
to the Line Output. Toggle between headphones and speakers. Example of a
minimalist setup: Streamer to HM1 Input A, analogue source to Input B, active
speakers to Line Out.
Precision comparison
Two sources connected to Inputs A and B, precision level meter connected to Line
Output. Source levels can be exactly matched using the level meter and the volume
controls. Activate the sources alternately by the Chan on/off switches.
2-Channel Mixing Console
As a mixer, the HM1 can merge any two sources at Inputs A and B to create
a new music programme - or simply cross-fade from one source to the other.
Effect/Test
A device is fed from output „A Thru" and its output is applied to Input B.
The ratio between the original and the „looped-in" signal is set at the
A/B volume controls. Or switch between the two.
P.8 | APPLICATION EXAMPLES
Advertisement
Table of Contents
