Table of Contents
Advertisement
ZÄHL HM1 MANUAL V 1.0
TROUBLESHOOTING
Checking mains fuses
In case your HM1 does not show any function although it is correctly connected and switched on, you may check the mains
fuses on the Mains Adapter HMP1.
• Unplug the power cable.
• Find the fuse holder drawer on the mains input assembly, between mains input connector and mains switch.
• Use your thumbnails or a small flat-blade screwdriver to unlock the latches at the top and bottom of the fuse drawer.
The drawer will pop out slightly.
• Take the fuse drawer out completely. It contains two identical fuses, size 5x20 mm, rating 0,63A time-lag.
• If broken replace them with the same type only.
• Put the fuse drawer back in place.
• Repower your unit.
• If it still does not work properly, contact us or your local dealer in order to get it serviced.
CONTACT
Zaehl Elektronik-Tontechnik
Am Stadion 18-24
D-51465 Bergisch Gladbach
Telephone +49(0) 2202 - 863 901
Mail info@zaehl.com
www.zaehl.com
P.18 | TROUBLESHOOTING & CONTACT
Advertisement
Table of Contents
