Notes, Safety Instructions, Warranty - Zahl HM1 Manual

ZÄHL HM1 MANUAL V 1.0

NOTES, SAFETY INSTRUCTIONS, WARRANTY

1. The equipment must only be used for the purpose described in this manual.
2. Keep the manual for further reference. When passing the equipment on, enclose the manual.
3. Do not operate the equipment at
- very high air humidity (>85% relative humidity)
- high ambient temperature (>40°C) or in the vicinity of heat radiating equipment or objects
- places which are exposed to solar radiation
- very low temperatures (<5°C)
4. Ensure appropriate air ventilation.
5. Do not store the equipment at temperatures below -20°C or above +50°C.
6. Do never expose the equipment to environmental conditions which can lead to the incidence of
condensation water.
7. Do not expose the equipment to mechanical stress or shock.
8. Ensure that liquids cannot get into the equipment.
9. Ensure that foreign objects cannot get into the equipment.
10. Only operate the equipment on a safe, legally approved, mains power supply
11. Only clean the equipment with smooth cleaning tissues and soft detergents.
12. Never open the equipment.
13. In case the equipment has been dropped or there is any external or functional damage, do not
continue to operate the equipment. Have the equipment checked at your dealer's workshop or a
person who is qualified to do such checks.
14. When shipping, use a package which protects the equipment from environmental impact such as
mechanical shock or humidity.
15. Manufacturer's warranty covers the equipment to be free from defects of quality at the time of
delivery for a period of 36 month presumed that
- the equipment was treated properly according to its intended use
- all information and safety instructions given in this manual have been followed
- the equipment shows no external damage
- the equipment is shipped to the manufacturer or to an authorised repair-shop free of charge
- a proof of purchase is supplied
- a detailed failure description is supplied
The manufacturer takes over cost of parts and labour incurred by repair. Unless otherwise
agreed any other costs including shipping and packaging will be charged.
16. We expressly exclude any liability for incidental or consequential damages which might arise from
operating the equipment, including failure of the equipment.
17. All information in this manual has been carefully reviewed. It has been updated at the time of pas-
sing for press. Nevertheless we do not take over any liability for sufficiency or errors.
18. EEC Declaration of Conformity: The equipment applies to applicable EMC rules 2014/30/EU
P.4 | NOTES, SAFETY INSTRUCTIONS, WARRANTY