Using Your Ageloc Lumispa Io - ageLOC LumiSpa iO User Manual

USING YOUR AGELOC® LUMISPA® iO
8
2272_94514492-1_ageLOC_LumiSpa_iO_UserManual.indd 8 2272_94514492-1_ageLOC_LumiSpa_iO_UserManual.indd 8
STEP 1
• Moisten face with water.
• Apply an ample amount of ageLOC LumiSpa
STEP 2
• Wet treatment head by placing it under running
• Press the Power button to start a treatment.
• Gently glide the treatment head back and forth in
Note: If you use a scrubbing motion or press too hard, the
device will pause and vibrate to remind you to apply normal
pressure and resume slow, broad strokes.
• The back lights indicate the current treatment zone.
STEP 3
• When the treatment is done, the device will stop.
• The device will turn off automatically.
• Rinse your face with water to remove residual
1
2 4
Note:
• If at any time you would like to pause your treatment, press
3
• ageLOC LumiSpa iO is safe to use in the shower or wet
• ageLOC LumiSpa iO is suitable for makeup removal.
treatment cleanser to all areas of the face, avoiding
eyes and lips.
water.
slow, broad strokes over one of the areas of your face.
The device will pause briefly between each of the
four zones, and the lights will progress to prompt
you to move to the next area.
treatment cleanser.
the Power button once. Unpause your device by pressing
the Power button again. To manually turn off the device,
press and hold the Power button.
environment. However, the magnetic charger should not
be exposed to water.
However, do not use the device for cleansing around the
eye area. Use ageLOC LumiSpa iO Accent System for
targeting the delicate skin around the eyes.
5/31/22 4:01 P 5/31/22 4:01 P