Digitax F2 PLUS Technical Manual
  1. Manuals
  2. Brands
  3. Digitax Manuals
  4. Automobile Accessories
  5. F2 PLUS
  6. Technical manual

Digitax F2 PLUS Technical Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Technical Manual
Installation and Programming
V 1.0
11/06/2020

Advertisement

Table of Contents
loading

Related Manuals for Digitax F2 PLUS

Summary of Contents for Digitax F2 PLUS

  • Page 1 Technical Manual Installation and Programming V 1.0 11/06/2020...
  • Page 2 The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.

  • Page 3: Table Of Contents

    Programming Keys ............................29 Programming Parameters (Questions could be locked depending on some Country specific settings) ... 30 The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.

  • Page 4: Introduction

    The second section explain the meter’s operative modes, the functions and the programming phase. The third sections contains the description of all the tariff programming parameters. The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.

  • Page 5: Electrical Connections Table

    Digitax rejects every legal responsibility. Fuse 2 A + 12 V BROWN Fuse 2 A Car Lights Switch The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.

  • Page 6: Specifications

    Printer Power Out: Maximum Current: direct from Vcc input Output Voltage: RS-232 serial ports: Standard COM1, COM2 The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.

  • Page 7: Connectors - Pins Out

    TRANSDUCER - connections: INPUT 2 GROUND + 12 VOLTS INPUT 1 ( SENSOR ) *Optional Hardware The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.

  • Page 8: How To Fix The Taximeter

    Sealed to the taximeter Screw 4MA 7x26 mmm BY A DOUBLE SIDE GLUED TAPE BY A VELCRO STRAP The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.

  • Page 9: Universal Meccanical Tranducer

    E) Fix the sensor’s cap to end the sensor’s assembling (open collector) operation and to have the sensor fully operative. Shield = Ground The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.

  • Page 10: Test Connector

    DISTANCE PULSE INPUT DISTANCE PULSES OUTPUT YELLOW FARE INCREMENT PULSE OUTPUT VIOLET GROUND GREY The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.

  • Page 11: E-Seal"- Electronic Sealing: 1St Section

    K Constant for Autotest events, the tariff CRC for Tariff changes, the bios CRC for Bios changes, the ticket CRC for Ticket changes. The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.

  • Page 12: E-Seal"- Electronic Sealing: 2Nd Section

    It is possible to toggle between 1 section and 2 section pressing K2 key in any moment. SECTION The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.

  • Page 13: How To Seal The Taximeter

    Sealing Plastic Disk Sealing Screw Sealing Bush Programming Cover Sealed to the Sealed to the bracket taximeter The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.

  • Page 14: Taximeter Display

    Approval E-Mark Number E-Mark Number Notified Body Number EC Type examination certificate number Bios Country Version Verification Year The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.

  • Page 15: Time Syncro

    Time Syncro The F2 Plus time clock can be synchronized to exactly minute 00 of each hour, if at least 7 days are passed from last synchronization or clock change. The Time Synchro works only if the manual time setting is disabled (Q269 = Yes).

  • Page 16: For Hire-Stopped-Hired

    • The right one shows the total extras • The right one shows the total extras. The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.

  • Page 17: K" Constant

    The “K Constant” is the number of pulses per Kilometer emitted by a transducer and received by a taximeter. K Constant = Pulses/km The pulses can be emitted by the car’s electronic transducer or, if the car is not provided of it, by the Digitax mechanical one. This constant can be already known or be tested on road.

  • Page 18: Time And Date Setting

    Press K3 button to set the taximeter base year. Press OP button to end the programming procedure and go back to For Hire position The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.

  • Page 19: Diagnostic Self-Test (Check Sum)

    Bin : 1000000100001 Dec : 4129 Register Init is Hex : 0000 CHECK = Hex : 31C3 The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.

  • Page 20: Statistical Memory

    Statistical Memory How to Read the Statistical Memory Content The F2 Plus taximeter records and keeps statistical data in 2 Memory Blocks, each one divided in 20 locations. The Block 1 allows to read, print or erase its information whenever desired.

  • Page 21: Statistical Memory

    Print Free Run Block Taximeter General Default Reset Blocks 2 (forced) Reset Blocks 1 (forced) Reset Blocks 1&2 (forced) The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.

  • Page 22: Statistical Memory

    For Hire sign stops blinking for few seconds. Press OP button to end the erasing procedure and go back to For Hire position. The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.

  • Page 23: The Tariff

    The taximeter calculates the tariff thanks to the interaction of 429 programmable parameters. They are arranged into blocks. The F2 Plus have 63 parameters blocks that can be programmed to generate even the most complex tariff. Two blocks are very particular: Block 0 and the Working Block.

  • Page 24: The Tariff

    The blocks available in the taximeter are 63 and each one has its set of 429 programmable parameters. Program a tariff in the F2 PLUS taximeter is like to fill a table made of 63 columns (63 Blocks) and 429 lines ( Parameters).

  • Page 25: Tariff Show

    Extra Amount Amount Extra number 3 = F3 Extra Amount Amount Extra number 4 = F4 The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.

  • Page 26: Tariff Show

    (from F1 to F4): To exit from Tariff Show menu and go back to For Hire position, press OP. The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.

  • Page 27: The" Progdate

    “Progdate” is a kind of taximeter programming based on time events. This means that is possible to define a period of time during which a particular action is performed by the taximeter. The F2 Plus meter can be programmed with up to 50 Progdate records, every one with different activation times or action to be performed.

  • Page 28: The "Sel-Function

    This is the dimmer intensity that will be used when Dimmer is active, else when dimmer is not active the display will have the max intensity (100) The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.

  • Page 29: Programming Keys

    Insert the memory-key in its own connector, thus activating the automatic procedure of meter Connector Key Programming Key (Black) Views Memory Key (Blue) Key inserted in his connector The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.

  • Page 30: Programming Parameters (Questions Could Be Locked Depending On Some Country Specific Settings)

    0 (min) to 62 (max). 0 =Function disabled 1 to 62 = Block Number The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.
  • Page 31 Enable/disable measurements? - Should the waiting-time measurement be disabled while in Hired? The allowed answer is either: No(enabled) or Yes (disabled). No / Yes NIGHT TIME (Prog - Date N. 1) The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.
  • Page 32 The allowed value goes from 0 (min) to 62 (max). The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third...
  • Page 33 PROG-DATE N. 6 Block-number in Prog-Date 6 : NOT USED for F2 Plus 0 - 62 The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.
  • Page 34 8 (min. priority) to: 1 (max. priority). If two or more Prog-Dates have the same number then those Prog-Dates have the same priority. The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third...
  • Page 35 Load-value is Cost of Fare? - Is the parameter programmed in Q.150 for event counter 2 the cost of the fare? No / Yes The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.
  • Page 36 Starting from the next fare the parameters for normal time will be used. The allowed answer is either: 0 (No) or: 1 (Yes). The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.
  • Page 37 The taxi-light must flash? - If Yes the taxi-light will flash. The allowed answer is either: 0 (No: no flash) or: 1 (Yes: flash). No / Yes The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.
  • Page 38 Enable light n. 3 ON in day-time? - Should it be possible for light number 3 to be ON during the day-time? No / Yes The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.
  • Page 39 From Stopped back to Hired with key K2? - Should it be possible to go from Hired to Stopped pressing key K2? No / Yes The allowed answer is either: 0 (No: disabled) or: 1 (Yes: enabled). The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.
  • Page 40 0 - 65535 given in whole numbers. The allowed value goes from 0 (min) to 65535 (max). The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.
  • Page 41 Inhibit visualization memory-block n. 2? - Should it be impossible to visualize memory-block number 2? See also Q.328. No / Yes The allowed answer is either: 0 (No: visualize) or: 1 (Yes: inhibit). The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.
  • Page 42 Transmit undefined status to dispatcher? - Transmit an undefined status to the dispatcher? The allowed answer is either: 0 (No: don't transmit) or: 1 (Yes: transmit). No / Yes The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third...
  • Page 43 The allowed answer is either: 0 (No: COM1) or: 1 (Yes: COM2). COM1 protocol is Digitax or custom? - The protocol used for data-transmission on COM1 is the Digitax protocol or a custom protocol? 0= Digitax See also Q.383, Q.384 and Q.386, Q.387. The allowed answer is either: 0 (No: Digitax protocol) or: 1 (Yes: custom protocol).
  • Page 44 +32768 : press OP during block to automatically go ForHire when timer expires from Q 425 / Available for any custom parameter / to Q 429 The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.
  • Page 45 The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party is strictly prohibited.
  • Page 46 Digitax Italy Headquarter Via dell’Industria 16 62017 Porto Recanati (MC) - ITALY Phone +39 071 7590984 – Fax +39 071 9797405 Web: www.digitax.com – E-mail: info@digitax.com Digitax UK Digitax Mauritius Digitax Deutschland Smokehouse, 31 Tanners P.O. box 775, Bel Village Taxitech Handelsges.

Table of Contents