Magic Bullet Mini juicer User Manual page 6

assembling the
magic bullet
Mini Juicer.
1
Motor Base
Place the
a clean, dry, level surface,
like a countertop. Make
sure the unit is unplugged.
10
®
2
Juice Bowl
on Place the
Motor Base.
top of the
Juice Bowl
The is keyed to
fit correctly in one position
on top of the Motor Base,
so rotate or adjust the
bowl as needed until it is
seated in place.
3
on Align the
motor drive coupling and
push down until it clicks into
place. You may need to
turn the
align it with the motor drive
coupling and make sure it is
properly seated in place.
Handle the
gripping the top edges,
being careful not to touch
the sharp teeth on the
base of the
4
Sieve
with the Place the
Cover
and
When placing the
Sieve to properly
Bowl Cover
Bowl, make sure the
cover's Feed Chute is over
the Sieve (A), and align
Sieve the Pulp Chute with the
by
back of the unit (B)
sits over the
open side.
Sieve.
A B
Juice Bowl
Juice Bowl
over the
Sieve.
Juice
Juice
onto the
so it
Juice Bowl's
11