Download Print this page

Magic Bullet Mini juicer User Manual page 13

Advertisement

troubleshooting.
problem
stopped in the middle of juicing
possible reason
You may have accidentally hit
the Power Button, moving it to
the OFF position.
One or both Locking Arms may
have disengaged.
The Mini Juicer may have been
accidentally unplugged
during juicing.
The unit may have overheated.
power button says ON but unit won't run.
problem
possible reason
The Juice Bowl may not be
properly seated.
One or both Locking Arms
may not be attached.
The Juicer may be unplugged.
The appliance may have
overheated.
24
solution
Move the Power Button to ON and
resume normal operation.
Making sure the Power Button is
OFF, attach the Locking Arm(s), then
resume normal operation.
Making sure the Power Button
is OFF, plug the unit back into
an outlet, then resume normal
operation.
Unplug the unit and let it cool down
for 15 minutes before continuing use.
solution
Making sure the Power Button is
OFF, check the Juice Bowl and ensure
it is properly seated on top of the
Motor Base, with the open side
facing the rear of the unit. Then
resume normal operation.
Making sure the Power Button is
OFF, attach the Locking Arm(s), then
resume normal operation.
Making sure the Power Button is OFF,
plug the appliance into an outlet,
then resume normal operation.
Unplug Mini Juicer and allow it to cool
down for 15 minutes before
continuing use.
care & maintenance.
®
Cleaning the magic bullet
Mini
Juicer is quick and easy. All
components attach and detach
easily, and except for the Motor
Base, all parts are dishwasher-
safe. Read on for cleaning tips
and best practices:
When washing in the
dishwasher, do not use the heat
sanitation cycle. The heat
sanitation cycle temperature
could damage your product.
step 1:
Always make sure
the Motor Base is unplugged
before you begin assembly,
disassembly, cleaning, or
storage of the unit.
step 2:
Once the Juice Bowl
is emptied, rinse all parts
except the Motor Base under
running water.
step 3:
Use the Cleaning
Brush right after juicing to scrub
the Sieve under running water.
caution:
the Sieve contains
sharp blades. Do not touch
the blades. Use the Cleaning
Brush that was included
with the juicer.
Be sure to properly clean the
Sieve every time you juice,
as minerals from fruits and
vegetables can cause buildup
in the filter, which may prohibit
maximum juice extraction.
tip:
Periodically clean the Juice
Bowl with a water and vinegar
mixture to avoid mold.
tip:
Always clean the Sieve as
soon as possible after juicing. If
allowed to sit, pulp will dry on the
Sieve and it will become more
difficult to scrub blocked holes.
If this happens, be sure to
allow the Sieve to soak in hot
water for 30 minutes to loosen
the particles.
tip:
For best results, clean Sieve
by brushing outside area first,
then brushing inside.
All Mini Juicer components
except the Motor Base are
dishwasher safe, even the Sieve.
You may also hand-wash parts
with warm, soapy water.
step 4:
To clean the Motor
Base, wipe down with a clean,
damp cloth.
warning: NEVER
submerge
the Motor Base in water or
any other liquid.
25

Advertisement

loading
Need help?

Need help?

Do you have a question about the Mini juicer and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Mini mbj50100