Magic Bullet Mini juicer User Manual page 10

disassembly
guide.
1
Make sure the Mini
Juicer is powered OFF
and unplugged before
starting disassembly.
Ensure that the motor
has completely stopped,
Sieve
the has stopped
rotating, and all moving
parts have stopped
before disassembling the
Mini Juicer
and removing
the remaining pulp.
18
2
Juice Cup
Remove the
Spout.
from under the
note:
To do this, you may need
Juice Cup
to tip the forward
slightly, so the cup has some
Spout,
separation from the then
slide out the cup.
3
Immediately turn the
Silicone Spout Cap
upwards. By turning
Spout Cap
the up right
away, you can avoid any
residual drips onto the
unit or onto the surface
Mini Juicer.
below the
B
A
4
Locking Arms
Unlock the
Juice Bowl Cover
from the
by pushing up from the
Locking Arms
bottom of the
(A),
on either side of the
Motor Base
— then let the
Locking Arms
two fall slowly
(B).
away from the unit
caution: NEVER
unlock the
Locking Arms
from the
Juice Bowl Sieve
while the
is still rotating. Always wait
until the unit is completely
Sieve
powered off, and the
as stopped rotating before
starting disassembly.
19