Table of Contents
Advertisement
Operation Manual / TPL76-C
8 Disassembly and assembly / 8.7 Installing cartridge group
© Copyright 2018 . All rights reserved.
Remove the lifting gear.
u
Remove guide rod (90490).
u
Screw in the speed sensor (86505) together with the O-ring (86506)
u
and plug in the cable connector (86515).
Reconnect oil and air lines.
u
Version with compressor wheel cooling system
Fit the air supply line. (See also chapter entitled Preliminary remarks /
u
Layout and functionality)
HZTL2485_EN
Revision F
April 2018
Advertisement
Table of Contents
