Advertisement
Manual
Valid for
10.2. Configuration
10.2.1. Home Menu
On the left side you will find the selection of the menu items.
The tabs above the configuration area show the sub-items input matrix, DSP, equalizer and storage.
Further to the right you will find the other basic settings of the device, the current heat load as well as the
device name, the IP address of the device and the current software version.
Input Matrix:
Input signals can be mixed and assigned to specific outputs via the input matrix.
Four zones with different volume can be created using the graphic controls.
The bars on the right show the current level while music is playing.
Version (modifications reseverd)
AMP 4200
111-425-04-001-00
Seite 6 of 17
21.02.2022
Advertisement
