Advertisement
Manual
Valid for
10.1.2. Configuration in the network
The AMP 4200 is delivered with DHCP. I.e. an IP address is automatically assigned to the device as soon
as it is recognized in the network.
Check the current IP address on the device. (Press on "ADJUST / SET" and turn to the left Device Info)
and enter this in the start bar of the browser:
Example:
Default password:
Username: admin
Password: admin
This opens the configuration interface.
Note:
If you access the amplifier via a network, you can also enter
If you have changed the user name / password in a previous configuration setting, please enter this
My login details:
10.1.2. RESET to factory settings
Simultaneously press the "BACK" button and the "ADJUST / SET" rotary button for more than 5
seconds. This returns the device to the factory settings.
Note:
A RESET (reset to factory settings) deletes all settings and all saved presets and sets all outputs to 4-8
ohms in the "Qutput Configurations" menu.
Version (modifications reseverd)
AMP 4200
111-425-04-001-00
My IP address:
User name:
_______________________
Password:
IP address:
Seite 5 of 17
172.22.0.139
____________
http://AMP4200/
_______________________
_______________________
in the start bar.
21.02.2022
Advertisement
