Subscribe to Our Youtube Channel
Related Manuals for modway EEI-5882
Summary of Contents for modway EEI-5882
- Page 1 A S S E M B LY I N S T R U C T I O N S EEI−5882 V1.01.24.22 Questions? Contact us! 609.256.9000 • cs@modway.com www.modway.com 780−437MD1−0...
-
Page 2: What You Need
+ Level 300mm + Silicone Adhesive or Caulk + Drywall Anchors and Screws Missing parts or hardware? Need assistance? + Other Wall-Mounting Hardware Contact us before returning your item. We're here to help! 609.256.9000 • cs@modway.com PAGE 2 OF 17 780−437MD2−0... - Page 3 Wood Dowel M8 x 25mm Wood Dowel M6 x 25mm Back Panel 1 Bottom Cam Bolt Ø6 x 24mm Front Front Bottom 7 x 2 PAGE 3 OF 17 780−437MD3−0...
- Page 4 Front Bearing Runner 350mm x1 Pair Front Bearing Runner 300mm x1 Pair Screw 4 x 12mm Divider Panel R Spring clip Cam Lock Ø12 PAGE 4 OF 17 780−437MD4-0...
- Page 5 Screw 9 x 38mm Screw 9 x 38mm PAGE 5 OF 17 780−437MD5−0...
- Page 6 Cam Lock Ø12 Drawer Side L 3 Screw 9 x 38mm PAGE 6 OF 17 780−437MD6−0...
- Page 7 Front Front x1 Pair Bearing Runner 350mm Bearing Runner 300mm x1 Pair Screw 4 x 12mm Drawer Side R 1 Cam Lock Ø15 PAGE 7 OF 17 780−437MD7−0...
- Page 8 Adjust Barrel Nut (R) by using screwdriver if necessary ! Hole Screw 9 x 38mm Direction Screw 6 x 70mm Barrel Nut Hex Wrench Screw 9 x 38mm PAGE 8 OF 17 780−437MD8−0...
- Page 9 Cam Lock Ø15 Cam Lock Ø15 PAGE 9 OF 17 780−437MD9−0...
- Page 10 Shelf Support (X 2) Screw 9 x 38mm Shelf Panel PAGE 10 OF 17 780−437MDA−0...
- Page 11 Screw 4 x 14mm Corner Bracket Right Side Panel Back Panel 1 Front Rail 1 Bracket-L/Hanger Bracket-R/Hanger Screw 4 x 28mm PAGE 11 OF 17 780−437MDB-0...
- Page 12 Wall Bracket Installation Guide 21.1 Use a drill to make all pilot holes. 21.2 Insert a Drywall Anchor Measurement Guide into each of the nine holes. All units are in millimeters. WALL 21.3 Install bracket with 3 screws. 21.4 Ensure your bracket measurements are correct Repeat with other brackets.
- Page 13 NOTE: Mounting hardware and tools are not included. We suggest professional installation. Hole = Ø PAGE 13 OF 17 780−437MDD-0...
- Page 14 Screw 4 x 14mm Door Hinge Sold separately Screw 4 x 14mm Rubber Pad Adjust the hinges, if required. Adjust laterally Adjust height Adjust depth Temporarily remove/dismantle the Door & Shelf during Basin/Sink /Plumbing work installation work to prevent water damage. PAGE 14 OF 17 780−437MDE−0...
- Page 15 The drawer(s) can be removed, if ever required. Locate the spring clip on both sides on the drawer glide. At the same time, press the clips and pull the drawer out. To reinsert, simply align the 2 sides of the drawer glides and slide in until fully inserted.
- Page 16 Your sink basin comes complete with a silver overfl ow ring. If you'd like to remove this overfl ow ring, you can do so by hand. Missing parts or hardware? Need assistance? Contact us before returning your item. We're here to help! 609.256.9000 • cs@modway.com PAGE 16 OF 17 780−437MDG−0...
-
Page 17: Connect With Us
Clean using a non-abrasive cloth and a mild cleaner. Never use harsh chemicals, as they could damage the fi nish or integrity of the item. CONNECT WITH US! Tag us @modway_furniture and #modway for a chance to be featured. PAGE 17 OF 17 780−437MDH−0...
Need help?
Do you have a question about the EEI-5882 and is the answer not in the manual?
Questions and answers