Programming The Stack - NSI MC 6300 Operation Manual

Programming Guide
Programming
Programming The Cue Stack is a collection of Memory Scenes that are already programmed in memory.
the Stack Each step of the stack may consist of a scene from any page in memory. Precise fade times
in tenths of second may be programmed into each step. Each step is played back using the
Stack Go button or manually crossfaded by using the Stack fader.
To program the Stack press the Program button followed by the Stack Go button. If the
Stack memory is not empty, the Stack Programming will automatically allow for editing of
the programmed steps and the top line of LCD will display "Edit Step" followed by the step
number. If the step is a new step, the LCD display will show "New Step" followed by the
step number.
Three different items can be programmed into each step; the fade time, the page and the
scene number. Use the Select button to underline the item and the Next and Previous buttons
to modify the item. Memory Scenes can also be selected with the Memory Scene buttons
and the Page number can be selected with the Page button. Using the Page button during
Stack programming will not change the Memory Page nor will tapping a Memory Scene
button activate a Memory Scene.
Setting fade time for each step is done by selecting the field with the Select button and
modifying the fade with the Next and Previous buttons.
Record the step by tapping the Stack Go button. The step number will advance to the next
step. Continue to record more steps by following the above procedure.
To end the Stack programming, press the Program or Blackout button. The maximum number
of steps that may be recorded is 128.
10
Move all channel slide controls to minimum.
Raise channel slider 1 to maximum.
Tap Chase button.
Lower channel slider 1 to minimum and 2 to maximum.
Tap Chase button.
Lower channel slider 2 to minimum and 3 to maximum.
Tap Chase button.
Tap the Blackout button.
EXAMPLE: Program the Stack with 4 steps using the first 4 Memory Scenes of
Page 1 with a fade time of 1.5 seconds.
Tap the Program button so that it' s LED is lit.
Tap the Stack Go button.
Use the Select button to underline the fade time.
Use the Next or Previous buttons to set the time to 1.5.
Use the Page button to select page 1.
Tap Memory Scene 1.
Tap the Stack Go button to record step 1.
Tap Memory Scene 2.
Tap the Stack Go button to record step 2.
Tap Memory Scene 3.
Tap the Stack Go button to record step 3.
Tao Memory Scene 4.
Software Revision 1.00 and above
NSI CORPORATION
MC 6300