Table of Contents
Advertisement
OSD Firmware
KISS FW on FC
Please update the FETtec OSD Board before your first flight !
1. Open FETtec ESC Configurator
2. Connect the FETtec OSD Board to FC and via USB to FETtec ESC Configurator
3. choose KISS FC passthrough and press connect
4. latest firmware is remote available to flash
FETtec ALPHA FC firmware on FC
1. Make sure that your FC is running FETtec Alpha FC firmware
2. Connect the FETtec OSD Board to FC and via USB to ALPHA Configurator
3. Choose "Firmware" to get the latest update
Page 8
Advertisement
Table of Contents
Need help?
Do you have a question about the OSD Board and is the answer not in the manual?