Advertisement
7) SCHEDULE
Click "SCHEDULE" to access to the following page to set schedule.
A. CHOOSE A SCHEDULING FUNCTION: Choose scheduling functions from "DISPLAY
POWER ON/OFF", "SYSTEM POWER ON/OFF" and "INPUT SELECT". B. Start: Select start
time of the schedule.
C. Recurrence pattern: Click the corresponding check box to choose recurrence pattern.
D. Range of recurrence: Set start date and end date of the scheduling setting.
E. OK/Cancel/Remove Recurrence: Click "OK" to make the scheduling setting take effect.
Click "Cancel" to cancel the setting. Click "Remove Recurrence" to remove current
scheduling setting.
F. CURRENT SCHEDULE: Shows current set schedule in the table.
8) FIRMWARE
Click "FIRMWARE" to access to the following page.
Advertisement
